Lilly AC is a flat buld LED-light engine for center mount.
Low build and with center hole for wires
OptoDrive® LILLY80 AC is a LED-light engine for pendants.
230VAC – No need for a driver
You are able to connect the LED-module directly to 230VAC mains and won’t need a bulky driver.
This allows freedom to design slim fixtures without making place or need extra cables for a driver.
And without an extra component there is less risk of failure.
Silicone conformal coating – for improved moist resistance
The LED-engine has a conformal silicone coating over the components to make it even more suited for outdoor lights.
Consistent form factor
Round compact shape that lasts
For small to big round luminaires we have our round LED-modules in different shapes.
From the smallest Steffi, to the medium sized Crystal and Lilly to the bigger Sanna.
Other AC LED-engines
|Power||10W | 22W | 32W|
|Flux||1200lm | 2200lm | 3200lm|
|CCT options||2 700K, 3 000K, 4 000K|
|Number of LED's||60|
|Life length||>50 000h|
|Power supply||AC: 230VAC direct to mains|
|Stroboscopic effect metric (SVM)|
|Flicker metric (Pst LM)|
|Surge protection (Volt)||1000V on board|
|Module dimension (mm)||Ø80mm|