OptoDrive®

A new generation of light sources with integrated electronics

Menu

The OptoDrive® module

All the OptoDrive® LED-modules are dimmable and have various configuration possibilities for lenses and drivers. The modules are available in a huge variety of shapes and sizes, still with a consistent formfactor over time.

Shape and size

The OptoDrive module is a highly variable platform. The connectors and lenses have the same formfactor over the years and our oldest module is still a bestseller. With several shapes and sizes you will find a version that fits your design. For sure!

IoT LED - Hexagonal
Hexagonal

The hexagonal modules are designed to fit in round, square or hexagonal fittings. The hexagonal designs are available in three different versions – Felicia, Clara and Svea.

Round

For small to big round luminaires we have our round LED-modules in different shapes. From the smallest Steffi, to the medium sized Crystal and Lilly to the bigger Sanna.

Linear

As a replacement for strip lights, LED is the perfect choice. The linear modules are available in four versions – Gustav and Anders in fixed lengths and the extendable Victor and Theo.

Explore all products

Power supply

Our platform is developed to provide several solutions for power supply. In order for you to have the best possibilities to develop your ideas for a luminere we have three versions.

AC – no need for a driver

You are able to connect the LED-module directly to 230VAC mains and won’t need a bulky driver. This allows freedom to design slim fixtures without making place or need extra cables for a driver. And without an extra component there is less risk of failure.

230VAC
ID – built in driver

For our low voltage solutions we mount the driver directly on board. For customers in need of quality DC LED-modules, for example high-end design or medical. We have a range of assessories branded DimLight with dimming for PWM, encoders or Dali connectability.

12-36VDC
ED – external driver required

Certain applications require more functionality on driver. In this case, the LED-module is stripped of components – all features are located to an external driver. This might be the case when you connect the fixtures to a big network with for example either Dali or DMX.

350-700mA

Simplicity

With the OptoDrive™ modules, all development is made to make it easy for you as a lighting manufacturer. We have several versions that fits easy in a variety of fixtures, and when you find a module that fits – we won’t change it.

Features

All OptoDrive AC LED-modules are dimmable ready to be installed directly into your luminaire. With the new FlickerFree and WireLess options we aim to deliver a product, standardized and flexible enough for you to use in all your fixtures.

Expansion port

Our modules SVEA and THEO are equipped with an expansion port for extended functionality. Your fixture can be wireless with bluetooth or ZigBee within a minute, just plug in a card in the expansion port. There are also sensor cards for motion and daylight detection available.

Environmental

RoHS Compliant

All our LED modules meet the Restrictions of Hazardous Substances (RoHS). It is a very serious problem that lead and other harmful materials are being used in commercial and industrial products, causing more and more environmental problems. This has led to regulations such as RoHS (Restriction of the use of certain Hazardous Substances) from the EU and the Japan Ministry of Trade and Industry (MITI).

All LED module makers providing products to these countries should comply with these restrictions. In order to meet the RoHS regulation, Optoga is strictly implementing a ban on lead and other hazardous materials in its products. This is in compliance with our responsibilities as good corporate citizens.

Quality

We put a lot of effort in our LED-modules. Since we produce an article that is
meant to be built-in – and stay there – we do our very best in making sure
everything is top notch!

Hexagonal

All our modules are developed and produced according to IPC class 2. All stages from design, development and production of circuit boards to assembly of the PC, follows a strict standardized protocol to ensure highest quality for the end product.

IPC Class 2 is for special electronic products with a desired continous run. Since the effects of a failure are big, the level of quality is higher.

To ensure all components are mounted correctly on the board, our modules are X-rayed. That way we can maintain our products within the range for IPC class 2.

Read more on IPC

Life length

Our modules have a life-length of 50 000 hours. We estimate the life-length of our modules with LM-80.

Design for Environment

According to the EU-directive 2002/95/EC (RoHS) the following substances must not be used in this product:
• Lead (Pb) alloys
• Mercury (Hg)
• Cadmium (Cd)
• Chromium (6+) compounds

Traceability

To give our customers best possible service all our LED-modules have an ID number printed on the board. We can track down each individual module and check each component and batch. This is to ensure our customers get the same light order after order.

EMC

Electromagnetic compatibility (EMC). Limits for harmonic current emissions (equipment input current ≤ 16 A per phase).
IEC 61000-3-2:2005/A2:2009

Electromagnetic compatibility (EMC). Limitation of voltage changes, voltage fluctuations and flicker in public low-voltage supply systems, for equipment with rated current ≤ 16 A per phase and not subject to conditional connection.
IEC 61000-3-3:2008.

Verification of conformity

All our modules are controlled and verified by Intertek and this is under process for IEC 62031 approval.

LED modules for general lighting.
EN 62031:2008+A1:2013.

Photo biological safety of lamps and lamp systems.
EN 62471:2008.

Limits and methods of measurement of radio disturbance characteristics of electrical lighting and similar equipment.
EN 55015:2006+ A1:2007 + A2: 2009

Low Voltage Directive.
2006/95/EC

EMC Directive.
2004/108/EC

RoHS2 directive.
2011/65/EU